EZ-ON Tether Mount for Family Vehicles

The EZ-ON 100TM Tether Mount is a safety device designed for securing passengers in personal vehicles, particularly those with special needs requiring additional upper body support. It connects to the vehicle's tether anchor and is used with compatible EZ-ON vests.

Key Features

• Vehicle Compatibility: Designed for use in personal vehicles with factory-installed tether anchors.
• Vest Compatibility: Compatible with EZ-ON vests, including models 303Z and 403PB.
• Weight Capacity: Suitable for passengers weighing over 31 lbs (14 kg).
• Installation Options:
  • Connects to the vehicle's existing tether anchor point.
  • If the passenger's weight exceeds the vehicle's tether anchor rating, installation of the EZ-ON tether anchor hardware kit (sold separately) is recommended.
• Usage Requirements:
  • Must be used with a vehicle seatbelt.
  • Not compatible with booster seats.
  • For passengers over 4'9" (145 cm), the product transitions to a positioning device, and the vehicle's seatbelt should be used as intended by the manufacturer.
• Maintenance and Replacement:
  • Recommended replacement every six years from the date of manufacture.
  • Inspect regularly for damage or wear and replace if the product has been involved in a crash.
• Compliance: Meets FMVSS213 standards.

Installation Overview

1. Locate Tether Anchor: Refer to the vehicle's owner manual to find the factory-installed tether anchor point.
2. Attach Tether Mount: Connect the tether mount's snap hook to the vehicle's anchor.
3. Position Straps: Drape the "Y" strap over the back of the seat.
4. Secure to Vest: Attach the hooks at the ends of the "Y" strap to the shoulder adjusters on the EZ-ON vest.
5. Adjust Fit: Tighten the straps to hold the passenger's shoulders firmly against the back seat.
6. Seatbelt Use: Thread the vehicle's seatbelt through the loops on the vest and buckle it low on the lap.